|
Home < Products < Precision Calibration Standards < Torque Wrenches |
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
Torque Wrenches |
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
Description Maury's torque wrenches are recommended for tightening coaxial connectors in order to obtain optimum repeatability and prolong connector life. They employ a "break" design so it is impossible to over-torque a coupled junction, and torque can be applied in either direction. Each Maury torque wrench is factory preset to the proper in/lbs for tightening its coaxial connector type, and the color coded handles make it easy to select the correct wrench from your toolbox at a glance. Maury torque wrenches are included in many of our VNA calibration kits, and accessory kits, and can be ordered separately by the model numbers listed below. If this list doesn't include the right kit for your application, please contact our Sales Department or your local Maury representative for assistance. |
2698G1 8799A1 2698C2 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
Available Models MPC14,
LPC14
1 12 + 0.4 /
-0.4 7mm, LPC7, Type
N
2,
NMD3.5, NMD2.92,NMD2.4 12 + 0.4 /
-0.4 TNC
3,
MPC6 12 + 0.4 /
-0.4 LPC/OSP™
5 SC 12 + 0.4 /
-0.4 7-16 20 + 0.5 /
-0.5 8799A1
6 3.5mm, MPC3 or K
(2.92mm), Q (2.4mm) SMA, OSM OSSM,
MPC8 |
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
1 MPC14 and LPC14 connectors are precision 14mm connectors, essentially the same as GR900 connectors and are supplied with 1.0 hex nuts. 2 Precision type N connectors supplied with 3/4 hex nuts. 3 Precision TNC connectors supplied with 9/16 hex nuts. 4 Handle color represents torque value: blue = 12 in/lbs; red = 8 in/lbs; black = 5 in/lbs; green = 20 inlbs (unless otherwise marked on the nameplate). 5 Precision LPC/OSP™ per Maury data sheet 5E-065. 6 Do not use on SMA connectors; damage can result. |
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
